bel power solutions 152 north 3rd street, suite 805 san jose, ca 95112 usa ? 201 5 bel power solutions, inc. north america +1 - 866.513.2839 asia - pacific +86.755.29885888 europe, middle east +353 61 225 977 tech.support@psbel.com d - 2452 - st02 _001 ? output power 2 0 00 w ? active pfc ? high efficiency ? input voltage: single - phase 2 20/240 vac ? main output : 48 v / 40 a ? auxiliary output : 12. 5 v / 1 a ? current and voltage m onitor ing ? remote enable/disable ? baseplate cooling the bpeu series of ac/dc converters is available with multiple outputs and output power from 1300 w up to 3000 w. all models incorporate active power factor correction (pfc). other standard features include current and voltage monitoring, overvoltage, overtemperature as well as short circuit protection. these power supplies were designed to power radio - frequency power amplifier (rfpa) applications in th e broadcasting industry.
bpeu 2452 ? 201 5 bel power solutions, inc. 866.513.2839 tech.support@psbel.com d - 2452 - st02 _ 001 parameter description / condition voltage 185 C 264 vac single \ phase current 12 . 5 a @ full \ load @ 185 vac single \ phase frequency 4763 hz efficiency 93% typ. @ full \ load @ nominal input power factor > 0,98 @ full \ load @ 230 vac inrush c urrent 30 apk @ 230 vac output voltage (vdc) inom (a) i pk (a) tolerance % ripple % power (w) v1 * +46 to 51 40 43 1 < 1 2000 v2 +12. 5 1 1.2 5 3 12 * v1 adjustable by multi \ turns trimmer set on board. parameter description / condition over \ \ \ \ \ parameter description / condition output v1 current monitor linear analogic signal 100 mv \ \ parameter description / condition operating temperature: \ \
bpeu 2452 ? 201 5 bel power solutions, inc. 866.513.2839 tech.support@psbel.com d - 2452 - st02 _ 001 parameter description / condition safety: en60950 - 1 emc / emi en55022 conducted noise ( industrial level ) en61000 \ 4 \ 4 fast \ transients en61000 \ 4 \ 5 surges ( 2 kv common 1 kv differential) en61000 \ 4 \ 11 voltage \ dips en61000 \ 3 \ 2 harmonics current ce mark parameter description / condition input n 3 fast \ on male connectors \ 6.35 x 0. 8 mm (line, neutral, pe). main output (v1) n 4 fast \ on male connectors \ 6.35 x 0. 8 mm (2 x positive pole + 2 x negative). signals /controls/aux.(v2) male flat type 10 pole dual in line connector figure 1 C connections
bpeu 2452 ? 201 5 bel power solutions, inc. 866.513.2839 tech.support@psbel.com d - 2452 - st02 _ 001 figure 2 - mechanical drawing all dimensions are nominal and expressed in millimeters. tolerance 0. 5 mm max. nuclear and medical applications - products are not designed or intended for use as critical components in life support systems, equipment used in hazardous environments, or nuclear contr ol systems. technical revisions - the appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. specifications are subject to change without notice.
|
